User guide / Methods and records
Run an approved Method
Analyze new assay measurements using the settings in an approved Method, then review and save the report.
Who can use this: All current roles in an active Team, including Reviewer. The Method version must be approved and compatible with the current product.
Before you start
Know the approved Method and version required by your procedure. Prepare new assay measurements with the layout, sample roles and units that its recipe expects. A routine run uses the saved recipe, not a fresh model choice.
Run the locked recipe
- Open Methods, choose the intended Method and version, and check Approved. Select Run approved Method. You can also reach the Method library from New analysis using Choose a method.
- Confirm the Approved Method name/version shown in the workflow. Enter Analysis name so the new run can be identified later.
- Use Choose file for the new measurements, confirm the worksheet/region and Continue through the map, dilutions and model. Inspect the locked settings and ensure the new plate matches them.
- Use Run analysis when ready. Watch the existing operation until the saved result opens, then inspect the calculation, suitability, exclusions, source and Method/version.
- Select Load PDF preview and Download PDF for that completed run. Confirm the report belongs to the new data and exact Method version before filing it.
Recognize the routine result
The new analysis records the source file, results and report, together with the approved Method version used. It does not replace the development analysis or an earlier routine run. A passing calculation or suitability badge is not automatic sample release.
If the Method or data is incompatible
Draft, in-review and retired versions cannot start new routine work. Select the correct approved version; if none is suitable, use the controlled development and review process.
If a saved Method is incompatible with the current product, use the offered action to copy it for development, then review a new version. Do not alter the old recipe or describe an unapproved development result as a controlled routine run.
If the file or plate layout is wrong, stop and select the correct compatible source. Routine settings are deliberately locked; moving to development is not an override of an approved Method.
Edition and printing
Provenarium User Guide · PROV-USER-GUIDE · Edition 1
Published 2026-09-20
These instructions apply to the product releases listed below.
Applicable product releases: release-2026.09.20.1
Instructions checked: 2026-09-20 · Software revision cbee590c9fac5ff117db4333ffa0404e9d1d8082